Fence Repair

Yes, sagging gates are one of the most common fence repairs. The fix usually involves realigning the gate, replacing hardware, and sometimes reinforcing or replacing the gate post.

If only a few boards or posts are damaged, repair is usually the better value. If more than 30% of the fence is in poor condition, full replacement is often more cost-effective in the long run.

If the fence leans or wobbles, the post is likely rotted at or below ground level. Push on the fence near the post — if it moves significantly, the post needs to be replaced rather than repaired.

Standard cedar is the most common choice in North Texas because it resists rot and insects naturally. Your handyman will match the existing wood type as closely as possible.

Check the Fair Price Guide on HomeRepairRates.com for current pricing. Gate repairs start around $255, board replacements around $325 for up to 10 boards, and post replacements around $285.

Replacing a single fence post typically takes 2-3 hours. The old post must be removed, the hole re-dug if needed, and the new post set in concrete with time to cure.

Minor repairs like replacing boards or posts typically do not require a permit. Full fence replacement or new fence installation may require a permit depending on your city. Check with your local building department.